|Your Source for plastic sheet, plastic
sheets, acrylic sheets, acrylic sheet, plastic sheeting,
cutting board, cutting boards, acrylic tubing, plastic
rods, plastic rod, polyethylene sheet, pvc sheet, and
Select the category and type of sheet, rod, or shapes from the list on
the left or check out the most popular below and to your
Popular Sheet, Rod & Shapes:
Acrylite® Acrylic plastic sheet is completely
transparent, flexible, and exhibits great resistance to
breakage. Acrylic is excellent material to use in place
of glass for windows, skylights, doors, partitions, etc.
It is lightweight, half the weight of glass, and it is
virtually unaffected by nature. Fabrication is
easy, as it can be sawed with fine tooth blades, drilled
with plastic drills, sanded and polished. Also, it can
be cemented with Acrylic cement. It meets FDA standards,
is UV stabilized, and has a UL 95 Flammability rating.
Supplied with protective film mask. The forming temp is
350° F. Applications include inspection windows, sight
gauges, windshields, meter faces, protective covers,
safety shields, tanks, desk tops, displays, trays, and
These sheets can be heat formed, shaped and welded
to fabricate ducts, hoods, and much more. They have
excellent corrosion resistance to a wide range of items.
Polyethylene is susceptible to stress cracking when
exposed to ultraviolet and some chemicals. Wetting
agents such as detergents accelerate stress cracking. It
cannot be cemented but easily welded with a plastic
welder. The Low Density Polyethylene has a .92 density.
Semi-rigid with good impact resistance and abrasion
resistance. It is white translucent with working temps
of 0-140° F. and a forming temp of 245° F.
This PVC sheet has excellent corrosion
resistance and weather resistance. The working temp is
33° F to 160° F. and the forming temperatures of 245° F.
It is good electrical and thermal insulator and has a
self-extinguishing per UL Test 94. PVC applications are
almost unlimited. It's the most widely used member of
the vinyl family. It is excellent when used for
corrosion-resistant tanks, ducts, fume hoods, and pipe.
Ideal for self-supporting tanks, fabricated parts, tank
linings, and spacers. It is not UV stabilized and has a
tolerance of +or 10%.
Phenolic is a hard, dense material made by
applying heat and pressure to layers of paper or fabric,
impregnated with a synthetic resin. These phenolics are
approximately half the weight of aluminum and their
physical toughness resists abrasion, friction, impact,
and material fatigue. Special properties fight off the
corrosive action of water and many chemicals, increasing
the service life and efficiency of your product parts.